IS600Z

IS600Z

The Best Budget Zero Turn for Landscapers

Featuring our patented suspension technology, heavy-duty Hydro-Gear® Drive System and speeds up to 10 mph, this mower will give you all you're looking for and more. The IS® 600Z is capable of tackling tight places, providing maximum maneuverability and productivity.

IS600Z Features
• Debris Management: Briggs & Stratton® Commercial Series engines are built with the ultimate in dust and particle filtration, an advanced debris management system and beefed-up cylinder block structure.
• Operator Convenience: Ergonomic riding mower control panel features cup-holder and fuel gauge.
• Patented Suspension System: Consists of adjustable rear coil-over-shocks (shown) and front independent adjustable coil-over-shocks.
• Ride-On Mower Warranties: Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.
• Exceptional Performance: Patent-pending steering system delivers exceptionally smooth performance.
• Integrated Transmission: Commercial Hydro-Gear® ZT-3200™ transaxles are designed for high performance and are fully serviceable.
• Easy Access: Quick removal of the floor pan provides convenient access to the top of the deck for easy cleaning and service.
• Heavy-Duty Bumper: Heavy-duty bumper protects the engine while also allowing for easy service access.
• Smooth Controls: Smooth, precision controls last longer as a result of pillow block bearings on control mounts.
• Mower Spindles: Cast-aluminum grease-able spindles feature 1” shaft with 2.5” x 1” dual ball bearings with top access grease fittings and pressure relief valve.
• Cut Height: Foot-operated deck lift, with adjustable pedal, can change cut height in 1/4" increments from 1.5"- 4.5".
• Acres Per Hour: Mows up to4 acres per hour, based on 80% efficiency.
• Mile Per Hour: Up to 10 MPH ground speed, reverse 4 MPH.


400s.png?Revision=8wpV&Timestamp=DHR4FG

400S

Best In Class Speed, Toughness

The Ferris® 400S zero turn mower is the the best of both worlds. On a compact, entry-level body, the 400S is able to navigate tight areas without sacrificing commercial grade attributes, providing 44" or 48" deck width options. A large fuel capacity, hefty drive tires for added traction, and a dual drive system set the 400S far above the competition.

400S Features
• Commercial Grade Power: Briggs & Stratton® Commercial Series engines are built with the ultimate in dust and particle filtration, an advanced debris management system and beefed-up cylinder block structure (Kawasaki® FR651V also available).
• Patented Suspension: The 400S comes equipped with independent rear coil-over shocks meaning less concern for uneven ground, and more focus on getting work done.
• Thoughtful Styling: Flanking the operator seat you will notice a conveniently integrated cup holder and an easy to read fuel gauge for the generous 5.5 gallon fuel tank.
• Fabricated Bumper: The fabricated steel / tubular bumper protects the 400S's engine while giving easier access for service, and accepts a variety of attachments like a bagging or tow/hitch system.
• Ride-On Mower Warranties: Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability (see operator's manual or dealer for complete warranty details. Refer to engine operator's manual for engine warranty.)
• Hydro-Gear® ZT-2800®: The dual Hydro-Gear® ZT-2800® transaxles deliver speeds up to 8 mph and feature an external oil filter for easier maintenance, so you can spend more time getting work done.


isx800z.jpg?Revision=cWpV&Timestamp=9nHdFG

ISX800

Affordable Commercial Zero Turn with Next Generation Ferris Suspension Technology

Featuring the next generation of Ferris suspension technology – ForeFront™ Suspension, a 2-belt iCD™ cutting system, heavy-duty Hydro-Gear® drive system and travel speeds up to 10 mph, the ISX™ 800 is engineered to increase efficiency and operator comfort.

ISX800 Features
• ForeFront Suspension System: The system utilizes four upper and lower control rods that ensure the front caster bearing remains vertical through the full range of travel. This controlled motion results in a smoother ride, more precise tracing of the terrain and an improved cut.
• Ride-On Mower Warranties: Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.
• Integrated Transmission: Commercial Hydro-Gear® ZT-3400™ transaxles are designed for high performance and are fully serviceable.
• Easy Access: Quick removal of the floor pan provides convenient access to the top of the deck for easy cleaning and service.
• iCD™ Cutting System: Innovative iCD™ Cutting System was engineered to produce the best possible cut in a multitude of conditions.
• Accessibility: Quick removal of the floor pan provides convenient access to the top of the deck for easy cleaning and service.
• Smooth Controls: Smooth, precision controls last longer as a result of pillow block bearings on control mounts.
• Mower Spindles: Cast-aluminum grease-able spindles feature 1” shaft with 2.5” x 1” dual ball bearings with top access grease fittings and pressure relief valve.
• Acres Per Hour: Mows up to 5 acres per hour, based on 80% efficiency.
• Miles Per Hour: Up to 10 MPH ground speed, reverse 6 MPH.


ISX3300.jpg?Revision=Z1pV&Timestamp=xb1dFG

ISX3300

The Leader In Suspension Technology For Turf

Featuring the next generation of Ferris suspension technology – ForeFront Suspension, a 2-belt iCD cutting system, heavy-duty Hydro-Gear drive system and travel speeds up to 12 mph, the ISX 3300 is engineered to increase efficiency and operator comfort.

ISX3300 Features
• Forefront Suspension System: The system utilizes four upper and lower control rods and mower-specific shocks that ensure the front caster bearing remains vertical through the full range of travel. This controlled motion results in a smoother ride, more precise tracing of the terrain and an improved cut.
• Ride-On Mower Warranties: Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.
• Redesigned Rear Bumper: The redesigned rear bumper provides additional ground clearance for moving over curbs and loading trailers. Higher side walls protect the engine while maintaining easy service access.
• 500 Hour Oil Change: Vanguard™ Engines with Oil Guard System reduce maintenance time and costs by up to 60%.
• Drive System: Dual, commercial Hydro-Gear® ZT-5400 Powertrain® transaxles deliver unmatched power and durability.
• Premium High-Back Suspension Seat: Mow in superior comfort with arm rests, multi-position head rest, adjustable lumbar and seat recline
• Hercules II Cast Iron: Hercules™ II Cast-Iron; 10" dia. cast-iron with industrial double row angular contact ball bearing with 1 3/16" dia. shaft. Contact ball bearings with 1 3/16" dia. shaft.
• Adjustable Cut Height: Foot-operated deck lift, with adjustable pedal, can change cut height in 1/4" increments from 1.5"- 5"


ISX2200.jpg?Revision=MD0V&Timestamp=C4tnFG

ISX2200

The Leader In Suspension Technology For Turf

Featuring the next generation of Ferris suspension technology – ForeFront™ Suspension, a 2-belt iCD™ cutting system, heavy-duty Hydro-Gear® ZT-4400™ Transaxle drive system and travel speeds up to 10 mph, the ISX™ 2200 is engineered to increase efficiency and operator comfort.

ISX2200 Features
• Forefront Suspension System: The system utilizes four upper and lower control rods and mower-specific shocks that ensure the front caster bearing remains vertical through the full range of travel. This controlled motion results in a smoother ride, more precise tracing of the terrain and an improved cut.
• Ride-On Mower Warranties: Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.
• Redesigned Rear Bumper: The redesigned rear bumper provides additional ground clearance for moving over curbs and loading trailers. Higher side walls protect the engine while maintaining easy service access.
• 500 Hour Oil Change: Vanguard™ Engines with Oil Guard System reduce maintenance time and costs by up to 60%.
• Drive System: Dual, commercial Hydro-Gear® ZT-4400 transaxles deliver unmatched power and durability.
• Premium High-Back Suspension Seat: Mow in superior comfort with arm rests, adjustable lumbar and seat recline
• Adjustable Cut Height: Foot-operated deck lift, with adjustable pedal, can change cut height in 1/4" increments from 1.5"- 5"


IS700.jpg?Revision=vY0V&Timestamp=K8YHFG

IS700

Commercial Components at an Amazing Value for Landscapers and Large Property Owners

The IS® 700 Series, with up to five feet of cutting width, is an amazing value. Featuring our patented suspension technology, iCD™ Cutting System, heavy-duty Hydro-Gear ZT-3200® drive system and up to 10 mph speeds, this mower is full of features to increase the operator's productivity. You'll mow more lawn in less time.

IS700 Features
• Patented Suspension: Consists of rear coil-over-shocks (shown) and pivoting front axle with coil-over-shocks.
• Ride-On Mower Warranties: Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.
• Exceptional Performance: The well-tuned steering system delivers smooth and confident operation for excellent performance time after time.
• Integrated Transmissions: Commercial Hydro-Gear® ZT-3200™ transaxles are designed for high performance and are fully serviceable.
• Easy Access: Quick removal of the floor pan provides convenient access to the top of the deck for easy cleaning and service.
• iCD™ Cutting System: Innovative iCD™ Cutting System was engineered to produce the best possible cut in a multitude of conditions.
• Mower Spindles: Cast-aluminum grease-able spindles feature 1” shaft with 2.5” x 1” dual ball bearings with top access grease fittings and pressure relief valve.
• Heavy Duty Bumper: Heavy-duty bumper protects the engine while also allowing for easy service access.
• Acres Per Hour: Mows up to 5 acres per hour, based on 80% efficiency.
• Miles Per Hour: Up to 10 MPH ground speed, reverse 5 MPH.